Monster Series 2003
The all-new, totally redesigned, 2003 Monster’s can be described in a single word “Monstrous”! When it’s time to go bigger than your insurance deductible allows, it’s time to take a Monster for a ride. We’ve taken every component on the Monster and redesigned it inside out. We started with our seriously adjustable Shiver MX cartridge dampers and put one in each leg, that’s two per fork! These dampers allow for externally adjustable low-speed, high speed, and rebound control. We have a new stronger and stiffer M-styled bolt-on arch that’s attached to two forged-cnc machined sliders with massive disc brake mounting posts. The upper and lower clamps are forged and cnc-machined, and anodized displaying the utmost attention to quality strength, and performance. The top clamp also accepts our direct mount stem option as does all our dual crown fork models. There are three Monster models to choose from, Super monster (300mm travel), Monster T (200mm travel), and the Monster T2 (200mm travel) for those riders on a Monster budget but still want to go Monster big.
Specification: Super Monster T (300mm)Damping system New 26 mm Shiver motocross cartridges
Open Bath
Adjustability Right leg: external rebound (top); external compression adj. (bottom)
Left leg: external high speed compression adj. (bottom)
Spring type Dual Coil springs
Travel 300 mm
Steer tube Alloy FR
Drop-out type 20 mm dedicated axle
Stroke, 300mm
Fork length, 692.8 mm
Steer tube-wheel offset, 69.5 mm
Weight, 5371g
Cost when new in 2003: £824.95
Spares
Y850691: 40mm Oil & Dust Seal Kit
Y538035: 40mm Guide Bush (each)
Y538028: 40mm Slide Bush (each)
Y850755/C: 03-06 Monster T 20mm axle
Y850746: 0mm Integrated Stem For 2003 Triple Clamp Forks
Y850747: 60mm Integrated Stem For 2003 Triple Clamp Forks
Y5141165: SPRING - Soft/ yellow
Y5141166: SPRING - Medium/ white
Y5141167: SPRING - Hard/ red
The all-new, totally redesigned, 2003 Monster’s can be described in a single word “Monstrous”! When it’s time to go bigger than your insurance deductible allows, it’s time to take a Monster for a ride. We’ve taken every component on the Monster and redesigned it inside out. We started with our seriously adjustable Shiver MX cartridge dampers and put one in each leg, that’s two per fork! These dampers allow for externally adjustable low-speed, high speed, and rebound control. We have a new stronger and stiffer M-styled bolt-on arch that’s attached to two forged-cnc machined sliders with massive disc brake mounting posts. The upper and lower clamps are forged and cnc-machined, and anodized displaying the utmost attention to quality strength, and performance. The top clamp also accepts our direct mount stem option as does all our dual crown fork models. There are three Monster models to choose from, Super monster (300mm travel), Monster T (200mm travel), and the Monster T2 (200mm travel) for those riders on a Monster budget but still want to go Monster big.
Specification: Super Monster T (300mm)Damping system New 26 mm Shiver motocross cartridges
Open Bath
Adjustability Right leg: external rebound (top); external compression adj. (bottom)
Left leg: external high speed compression adj. (bottom)
Spring type Dual Coil springs
Travel 300 mm
Steer tube Alloy FR
Drop-out type 20 mm dedicated axle
Stroke, 300mm
Fork length, 692.8 mm
Steer tube-wheel offset, 69.5 mm
Weight, 5371g
Cost when new in 2003: £824.95
Spares
Y850691: 40mm Oil & Dust Seal Kit
Y538035: 40mm Guide Bush (each)
Y538028: 40mm Slide Bush (each)
Y850755/C: 03-06 Monster T 20mm axle
Y850746: 0mm Integrated Stem For 2003 Triple Clamp Forks
Y850747: 60mm Integrated Stem For 2003 Triple Clamp Forks
Y5141165: SPRING - Soft/ yellow
Y5141166: SPRING - Medium/ white
Y5141167: SPRING - Hard/ red
 |
| Elby Sandland with the Super Monster |
No comments:
Post a Comment