Wednesday 29 May 2013

MBUK's 100 most amazing products

MBUK have just published a booklet called the '100 most amazing bits of bike bling ever! The gear that shaped the way we ride.' It's all part of MBUK's 25th anniversary celebrations.

Windwave are fortunate to have supplied a few of these, here is what we have.
Marzocchi 888, distributor since 1995

Club Roost riser bar, first riser bar to the market 1991

Distributor since 2012!

FSA Pig headset, we were FSA's very first distributor, since 1992

Mountain Cycle San Andreas, distributed 2003-2007

Marzocchi Z1 Bomber, distributor since 1995

Thursday 16 May 2013

Marzocchi 888 and 55 forks and 650b

Over the last few months Marzocchi have been checking the compatibility of the 650b wheel and the 55 and 888 series forks, here are their findings.


We wish to give you some additional information about the compatibility of Marzocchi MY13 fork series with 650B wheels.

888 Series: all 888 are compatible with 650b wheels up to the max. tire dimension shown in the following drawing (717mm tall x 60mm wide). Individual tires must be measured with fork fully compressed and have a minimum of 4mm “tire to crown” clearance.


55 Series: even though some 650b wheels actually can be assembled with 55 forks, we believe the clearance between the inflated tire and the lower part of the crown is not enough to let the tire turn freely. 
After the installation, individual tires must be measured with fork fully compressed and have a minimum of 4mm “tire to crown” clearance.

PLEASE NOTE THAT MARZOCCHI DO NOT AUTHORIZE ANY MODIFICATION OR ALTERATION TO THE 55 BRAKE ARCH AND/OR ANY OTHER STRUCTURAL PART.
The product warranty will be automatically void if the fork is altered and Marzocchi shall not be responsible for any indirect, incidental or consequential damages associated with the use of the Marzocchi suspension system.

Please see user manual for any further instruction.